Waterstone Fulton Industrial Prep Size PLP Pulldown Faucet – Lever Sprayer – Angle Spout

MODEL NO. 10290

SPEC SHEET INSTALL GUIDE

Description

• Smaller, food prep version of the standard reach PLP Pulldown.
• 10 degree angled spout direct water flows towards middle of sink.
• Thin and minimal body design.
• Modern diamond knurling gives industrial look.
• Rectangular, 2-bend U-spout.
• Spout has 8-3/8” reach and can swivel 360 degrees.
• “Positive Lock Pulldown” design locks sprayer in place when not in use.
• Anti-rocking spout assembly ensures smooth spout swivel.
• Lever handle sprayer pulls out 18” from spout.
• Counterbalanced weight on spray hose allows smooth pull and prevents snap back.
• Sprayer instantly diverts water from aerated stream to wide spray when lever handle is held.
• 1.75 gpm maximum flow rate with aerated tip.
• Innovative wave spring handle tension system prevents sagging.
• 25mm hot/cold ceramic disk valve cartridge.
• Resistant to reverse osmosis water.
• Made from eco-friendly solid brass or 316 stainless steel.
• 20” reinforced braided hoses with 3/8” compression fitting.
• Lifetime functional warranty.

Additional information

All Available Finishes

American Bronze, Antique Bronze, Antique Copper, Black-Oiled Rubbed Bronze, Caribbean Bronze, Chardonnay, Chocolate Bronze, Chrome, Classic Bronze, Distressed American Bronze, Distressed Antique Brass, Distressed Antique Copper, Graphite, Matte Black, Matte White, Satin Gold, Satin Nickel, Stainless Steel, Polished Nickel, Black Nickel, Polished Brass, Unlacquered Polished Brass, Polished Gold, Polished Copper, Distressed Antique Pewter, Matte Antique Pewter, Antique Brass, Matte Antique Brass, Antique Pewter, Matte Antique Copper, Satin Chrome, Satin Brass, Tuscan Brass

Waterstone Pulldown faucets with angled spouts

A faucet that comes at it from a different angle. The Fulton Industrial Prep Size PLP Pulldown Faucet features a diamond knurled angled spout that directs water flow toward the middle of the sink. An advantage that can be utilized on bigger sinks. The water stream points outward and hits the drain. This lessens splash, is perfect for cleanup and helps keep your clothes dry. This compact pulldown faucet delivers a blend of the past and future with an innovative design inspired by the ingenuity of American inventor, Robert Fulton, a pioneer in early steamboat engineering. The Fulton brings it’s signature 2-bend rectangular spout to the pulldown genre, but with an updated modern design. A subtle, yet powerful industrial knurling pattern gives this kitchen faucet a unique feel like no other. The faucet’s U-spout effortlessly flows waters through two 90 degree turns and has a 8-3/8” reach for maximum sink coverage. An anti-rocking assembly design ensures a smooth, full 360 degree spout swivel. Food prep and clean up are made easy with our unique “Positive Lock Pulldown” hand sprayer. Squeeze the sprayer’s lever handle and water instantly diverts from aerated stream to wide spray. The PLP sprayer can pull out up to 18” from the spout to reach every corner of the sink. A counterbalanced weight on the hose allows for a smooth pull every time and prevents snap back. The sprayer handle is fully insulated against heat and swivels easily in your hand. When finished, the sprayer easily slides back up into the spout and locks firmly into place. No sprayer sag! The handle design has a factory set tension system that allows for a smooth, consistent push and pull. A 25mm hot/cold ceramic disk valve cartridge helps save water and controls the flow to a maximum of 1.75 gpm. The handle can also adjust up to 22.5 degrees, right or left, for clearance from backsplash. Constructed from solid, eco-friendly brass or marine grade 316 stainless steel.  This Prep Size PLP Pulldown Faucet has a professional-level functionality that’s perfect for kitchen islands or smaller sinks.

Specified model meets or exceeds the following Codes & Standards:
• ASME A112.18.1
• CSA B125.1
• NSF 61/NSF 372
• CALGreen

Translate »